 |
| 材料结构 Material Structure |
| The same produce process and application except overlay the solid lubricants into the diamond shaped lubrication indents on the bearing surface, which will offer good friction at the start and process works and keep good condition even no oil giving at short time. So can be used in construction machines, gears, automo-tive clutch pads etc. |
|
|
| 技术参数 Tech.Data |
| 最大承载压力 |
Load capacity |
140N/mm2 |
| 适应温度范围 |
Temperature limit |
-100℃～+250℃ |
| 最高滑动速度 |
Speed limit |
1.5M/s |
| 摩擦系数 |
Friction clef |
0.06～0.25 |
| 允许最高PV值（干） |
PV limit (dry) |
2.6N/ mm2.m/s |
| 允许最高PV值（油） |
PV limit (oil) |
15N/mm2.m/s |
|
| 可供形式 Availability |
直套、止推垫片、滑板及其它非标品部件等
Cylindrical bushes, thrust washers, strip and non-standard parts as the clients supplied drawing |
| 公差 Tolerance |
| 一般推荐座孔公差为H7，轴径公差为f7 Recommend housing tolerance is H7 and the shaft is f7 |
|
